Supports plate cutting, expanded-metal cutting, rust/paint removal, and plasma gouging — giving you one machine for almost any metal job. Expanded-metal mode keeps a steady arc on mesh materials for cleaner, uninterrupted cuts. Rust-clean mode removes corrosion and coatings without grinding, saving time and reducing cleanup. Gouging mode removes old welds, fixes defects, and prepares bevels for faster, easier repairs. (Replace nozzle when using gouging mode.)
ARCCAPTAIN 60A Non-HF Plasma Cutter Machine, Blowback Pilot Arc, 110V/220V
Supports plate cutting, expanded-metal cutting, rust/paint removal, and plasma gouging — giving you one machine for almost any metal job. Expanded-metal mode keeps a steady arc on mesh materials for cleaner, uninterrupted cuts. Rust-clean mode removes corrosion and coatings without grinding, saving time and reducing cleanup. Gouging mode removes old welds, fixes defects, and prepares bevels for faster, easier repairs. (Replace nozzle when using gouging mode.)
Uses a non-high-frequency blowback start, eliminating electromagnetic interference common in HF machines and keeping electronics safe, suitable for home garages or workshop use, offering safer operation for both users and bystanders. Provides up to 60A on 220V for smooth, clean cuts on steel, stainless steel, aluminum, and more—up to 1-1/16"" (28mm). Cutting range: 12–16mm @110V, 20–28mm @220V. Current display: 20–35A (110V), 20–60A (220V). An external air compressor is required (sold separately).
The upgraded IPT60 torch delivers strong arc starting and cutting performance on rough, painted, rusty, or dirty surfaces. Its non-contact pilot arc reduces energy use and electrode wear, giving smoother, more precise cuts and up to 2× longer consumable life vs AG60. Includes two 0.9 mm and two 1.1 mm nozzles for better cut quality on 110V/220V—ready to use right out of the box. External air compressor required (sold separately).
SMART AIR PRESSURE MONITORINGEquipped with a smart air pressure system, it continuously monitors real-time pressure and displays it on the screen. If pressure drops below 30 PSI, the machine triggers an E80 warning; if it rises above 80 PSI, it shows E81 to prevent unsafe operation. Before cutting, you can switch to pressure-detection mode to ensure the pressure stays within the recommended range. Recommended pressure: 110V: 55 PSI | 220V: 50–75 PSI.
Supports PA (Pilot Arc) with adjustable arc time (2–10s) for cutting expanded metal and extending consumable life. PT (Postflow) time adjustable 5–15s (recommended ~8s) to cool the torch. 2T/4T modes allow hands-free operation: 2T – press and hold for short or precise cuts; 4T – press once to start, again to stop, reducing hand fatigue for long, continuous, or large cuts.
Features a pre-installed, metal-cased air filter with a quick-connect 1/4" NPT fitting—ready to use right out of the box. Built-in safety protections cover overload, overheat, and overcurrent conditions with clear error codes, plus an IGBT low-voltage warning. Rugged construction ensures reliable, long-term performance.
Supports plate cutting, expanded-metal cutting, rust/paint removal, and plasma gouging — giving you one machine for almost any metal job. Expanded-metal mode keeps a steady arc on mesh materials for cleaner, uninterrupted cuts. Rust-clean mode removes corrosion and coatings without grinding, saving time and reducing cleanup. Gouging mode removes old welds, fixes defects, and prepares bevels for faster, easier repairs. (Replace nozzle when using gouging mode.)
Uses a non-high-frequency blowback start, eliminating electromagnetic interference common in HF machines and keeping electronics safe, suitable for home garages or workshop use, offering safer operation for both users and bystanders. Provides up to 60A on 220V for smooth, clean cuts on steel, stainless steel, aluminum, and more—up to 1-1/16"" (28mm). Cutting range: 12–16mm @110V, 20–28mm @220V. Current display: 20–35A (110V), 20–60A (220V). An external air compressor is required (sold separately).
The upgraded IPT60 torch delivers strong arc starting and cutting performance on rough, painted, rusty, or dirty surfaces. Its non-contact pilot arc reduces energy use and electrode wear, giving smoother, more precise cuts and up to 2× longer consumable life vs AG60. Includes two 0.9 mm and two 1.1 mm nozzles for better cut quality on 110V/220V—ready to use right out of the box. External air compressor required (sold separately).
1 x 10FT Earth Clamp, 1 x 13.12FT IPT60 Cutting Torch, 1 x Plasma Cutter Machine, 1 x 1x10FT Air Hose, 4 x Nozzles, 2 x Electrodes
CUT60 Non-HF / Red / CUT 60 Non-HF · ASIN B0FWQ44Z9S
| Product | ARCCAPTAIN 60A Non-HF Plasma Cutter Machine, Blowback Pilot Arc, 110V/220V |
|---|---|
| Part Number | ARCCAPTAIN |
| Item Weight | 19.76 pounds |
| Package Dimensions | 18.11 x 14.96 x 7.48 inches |
| Size | CUT60 Non-HF |
| Color | Red |
| Style | CUT 60 Non-HF |
| Included Components | 1 x 10FT Earth Clamp, 1 x 13.12FT IPT60 Cutting Torch, 1 x Plasma Cutter Machine, 1 x 1x10FT Air Hose, 4 x Nozzles, 2 x Electrodes |
Use Buy on Amazon to check your selected configuration and complete your purchase. Review the final package and availability before ordering.
1 x 10FT Earth Clamp, 1 x 13.12FT IPT60 Cutting Torch, 1 x Plasma Cutter Machine, 1 x 1x10FT Air Hose, 4 x Nozzles, 2 x Electrodes. These details describe CUT60 Non-HF / Red / CUT 60 Non-HF.
![ARCCAPTAIN iControl CUT55 MP [Non-HF] Plasma Cutter Machine, APP Control](/assets/products/B0F98DL6YR.webp)
[NON-HF BLOWBACK PILOT ARC] This plasma cutter machine uses non-high-frequency blowback start, eliminating the electromagnetic interference commonly found in traditional HF machines. The pilot arc allows you to cut without touching the metal, ideal for rusty or painted surfaces. Delivers up to 55A (240V) for smooth cuts through steel, stainless steel, copper, and more—up to 1 inch (26mm) thick. Ensures smooth and clean edges for professional-grade results. (Cutting Range: 120V: 12–15mm | 240V: 1
Powerful Cutting AbilitySwitch effortlessly between 110V and 220V for home or workshop use. Achieve professional 1/2" clean cuts on steel, aluminum, and copper with advanced LGBT technology. Perfect for DIY projects and heavy-duty tasks. Recommended maximum cutting thickness: 12mm @ 35A / 110V / 55 PSl; 18mm @ 50A / 220V / 75 PSI. Note: Requires compressed air (compressor sold separately).
![ARCCAPTAIN iControl CUT65 MP [CNC] Non-HF Plasma Cutter Machine, 65 Amp](/assets/products/B0GL23JM5Q.webp)
[NON-HF BLOWBACK PILOT ARC] Uses a non-HF blowback pilot arc start to reduce electromagnetic interference, ideal for CNC systems. The non-contact arc cuts easily through rusty, painted, or expanded metal. Delivers up to 65A on 240V for smooth, clean cuts up to 32mm on steel, stainless steel, copper, and more.
Review the available configuration and complete your purchase on Amazon.
