Non-Touch Pilot Arc FunctionThe our 55A plasma cutter features a pilot arc function. It utilizes a high-frequency non-touch arc starting mode. The torch head does not need to touch the metal plate, reducing energy consumption during non-cutting work, minimizing electrode burning, and extending service life. NOTE: Do not switch voltages until the screen turns off and the fan stops.
ARCCAPTAIN 55A Plasma Cutter Machine, Non-Touch Pilot Arc, 120V/240V
Non-Touch Pilot Arc FunctionThe our 55A plasma cutter features a pilot arc function. It utilizes a high-frequency non-touch arc starting mode. The torch head does not need to touch the metal plate, reducing energy consumption during non-cutting work, minimizing electrode burning, and extending service life. NOTE: Do not switch voltages until the screen turns off and the fan stops.
Powerful & PortableUtilizing advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc, dual voltage 110/220V, with a 60% duty cycle. The maximum cutting thickness of our 55A plasma cutter can reach up to 3/4" @55A 240V 75PSI, while ideal clean cut at 1/2" @55A 240V 60PSI. Moreover, the plasma cutting machine only weighs 19.8LB & compact, we also provide a shoulder strap, make it easy to carry from one place to another.
Easy to Set Up There is an air pressure sensor inside the machine, allowing users to adjust the air pressure using the regulator. The air filter is mounted at the rear of the machine, enabling quick connection, saving installation time, and improving efficiency. The recommended air compressor pressure value is within the range of 60PSI, 5.3CFM. PLEASE NOTE: The Torch is AG60 Plasma Torch. NOTE: Requires compressed air (compressor sold separately).
One Step to Cut We have pre-set default parameters such as air pressure at 60 PSI and post-flow time at 5 seconds. Users only need to choose the voltage (120V/240V) and adjust the current knob to start cutting. The 2T/4T automatic cutting function releases your finger, making it extremely user-friendly for beginners and provide better welding experience.
Safety & Durable our Cut55 plasma cutter have passed a variety of professional tests and certifications including FCC and ANSI standards before leaving our factory. Post time function controlling the cooling time of the torch head to extend the service life of consumables. Please note: Current display at 120V is 20-35A, under 240V is 20-55A.
Non-Touch Pilot Arc FunctionThe our 55A plasma cutter features a pilot arc function. It utilizes a high-frequency non-touch arc starting mode. The torch head does not need to touch the metal plate, reducing energy consumption during non-cutting work, minimizing electrode burning, and extending service life. NOTE: Do not switch voltages until the screen turns off and the fan stops.
Powerful & PortableUtilizing advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc, dual voltage 110/220V, with a 60% duty cycle. The maximum cutting thickness of our 55A plasma cutter can reach up to 3/4" @55A 240V 75PSI, while ideal clean cut at 1/2" @55A 240V 60PSI. Moreover, the plasma cutting machine only weighs 19.8LB & compact, we also provide a shoulder strap, make it easy to carry from one place to another.
Easy to Set Up There is an air pressure sensor inside the machine, allowing users to adjust the air pressure using the regulator. The air filter is mounted at the rear of the machine, enabling quick connection, saving installation time, and improving efficiency. The recommended air compressor pressure value is within the range of 60PSI, 5.3CFM. PLEASE NOTE: The Torch is AG60 Plasma Torch. NOTE: Requires compressed air (compressor sold separately).
1x10FT Air Hose, 1x10FT Cutting Torch, 1x10FT Earth Clamp, 1xARCCAPTAIN Plasma Cutter, 1xAir Regulator & Filter
NON-HIGH FREQUENCYUses a blow back non-high frequency arc start to prevent signal interference and ensure safer operation for both users and bystanders, posing minimal risk to human health. The low-frequency arc maintenance system improves cutting stability, reduces electrode burn during idle time, and extends the life of consumables. Ideal for home garages and workshop environments.
MESH CUTTING & RUST CLEANINGEasily cuts through mesh and expanded metal without arc loss, ensuring smooth, continuous cuts and clean edges. Also features a fast rust removal mode—suitable for cleaning oxidized or dirty surfaces before welding or painting. Save time and improve workflow with dual-purpose functionality.
Delivers up to 3/5" clean cuts on steel, aluminum, and copper with advanced IGBT technology. Supports easy switching between 110V and 220V—suitable for home or workshop use. Built-in air pressure check ensures optimal cutting performance. The maximum cutting thickness is 15mm @ 35A 110V, 50PSI; 26mm@55A 220V, 60PSI. Current display at 110V is 20-35A, under 220V is 20-55A. Note: External air compressor required (not included).
SMART AIR PRESSURE MONITORINGEquipped with a smart air pressure system, it continuously monitors real-time pressure and displays it on the screen. If pressure drops below 30 PSI, the machine triggers an E80 warning; if it rises above 80 PSI, it shows E81 to prevent unsafe operation. Before cutting, you can switch to pressure-detection mode to ensure the pressure stays within the recommended range. Recommended pressure: 110V: 55 PSI | 220V: 50–75 PSI.
ROBUST SAFETY PROTECTIONThis plasma cutter features built-in protections for overload, overheating, and overcurrent that trigger clear error codes instead of sudden shutdowns, allowing users to respond promptly. It includes an IGBT low voltage warning, while IP21 water resistance delivers extra safety and extends the machine’s service life. Features a pre-installed, metal-cased air filter with a quick-connect 1/4" NPT fitting—ready to use right out of the box.
BLOW BACK PILOT ARC & SMART CONTROLThe IPT60 cutting torch with blow back pilot arc ensures reliable arc starting and stable cutting, easily handling rough, painted, rusty, or dirty surfaces without touching the metal. Supports PA (Pilot Arc) with adjustable arc time (2–10s) for mesh cutting or extended consumable life. Adjustable post-flow cooling (5–15s) protects the torch and extends lifespan. 2T/4T modes allow convenient finger-free control for smoother, more precise cutting.
CUT55 Pilot Arc / Red / CUT 55 Pilot Arc · ASIN B0D1TP5TTR
| Product | ARCCAPTAIN 55A Plasma Cutter Machine, Non-Touch Pilot Arc, 120V/240V |
|---|---|
| Part Number | ARCCAPTAIN |
| Item Weight | 14.1 ounces |
| Product Dimensions | 7.09 x 5.12 x 2.76 inches |
| Size | CUT55 Pilot Arc |
| Color | Red |
| Style | CUT 55 Pilot Arc |
| Material | Iron |
| Power Source | dc |
| Voltage | 120/240V dual voltage |
| Performance Description | clean cut 1/2" |
| Special Features | 60db |
| Included Components | 1x10FT Air Hose, 1x10FT Cutting Torch, 1x10FT Earth Clamp, 1xARCCAPTAIN Plasma Cutter, 1xAir Regulator & Filter |
CUT55 Non- HF / Red · ASIN B0F98ZPVRZ
| Product | ARCCAPTAIN 55A Non-HF Plasma Cutter Machine, Blowback Pilot Arc, 110V/220V |
|---|---|
| Part Number | ARCCAPTAIN |
| Item Weight | 18.81 pounds |
| Package Dimensions | 18.5 x 14.75 x 7.75 inches |
| Size | CUT55 Non- HF |
| Color | Red |
| Style | CUT55 Non- HF |
| Configuration | ASIN | Price | Purchase |
|---|---|---|---|
| CUT55 Pilot Arc / Red / CUT 55 Pilot Arc | B0D1TP5TTR | $219.99 | Buy on Amazon |
| CUT55 Non- HF / Red | B0F98ZPVRZ | $319.99 | Buy on Amazon |
Use Buy on Amazon to check your selected configuration and complete your purchase. Review the final package and availability before ordering.
Compare the labeled options and exact-reference specifications on this page. Select the size, color or package that meets your requirements, then confirm your choice before purchase.
120/240V dual voltage. These details describe CUT55 Pilot Arc / Red / CUT 55 Pilot Arc.
Iron. These details describe CUT55 Pilot Arc / Red / CUT 55 Pilot Arc.
1x10FT Air Hose, 1x10FT Cutting Torch, 1x10FT Earth Clamp, 1xARCCAPTAIN Plasma Cutter, 1xAir Regulator & Filter. These details describe CUT55 Pilot Arc / Red / CUT 55 Pilot Arc.
![ARCCAPTAIN iControl CUT55 MP [Non-HF] Plasma Cutter Machine, APP Control](/assets/products/B0F98DL6YR.webp)
[NON-HF BLOWBACK PILOT ARC] This plasma cutter machine uses non-high-frequency blowback start, eliminating the electromagnetic interference commonly found in traditional HF machines. The pilot arc allows you to cut without touching the metal, ideal for rusty or painted surfaces. Delivers up to 55A (240V) for smooth cuts through steel, stainless steel, copper, and more—up to 1 inch (26mm) thick. Ensures smooth and clean edges for professional-grade results. (Cutting Range: 120V: 12–15mm | 240V: 1
Powerful Cutting AbilitySwitch effortlessly between 110V and 220V for home or workshop use. Achieve professional 1/2" clean cuts on steel, aluminum, and copper with advanced LGBT technology. Perfect for DIY projects and heavy-duty tasks. Recommended maximum cutting thickness: 12mm @ 35A / 110V / 55 PSl; 18mm @ 50A / 220V / 75 PSI. Note: Requires compressed air (compressor sold separately).
![ARCCAPTAIN iControl CUT65 MP [CNC] Non-HF Plasma Cutter Machine, 65 Amp](/assets/products/B0GL23JM5Q.webp)
[NON-HF BLOWBACK PILOT ARC] Uses a non-HF blowback pilot arc start to reduce electromagnetic interference, ideal for CNC systems. The non-contact arc cuts easily through rusty, painted, or expanded metal. Delivers up to 65A on 240V for smooth, clean cuts up to 32mm on steel, stainless steel, copper, and more.
Review the available configuration and complete your purchase on Amazon.
